5-Axis CNC Precision Machining & Laser Cutting
Precision cutting and machining of stainless steel, aluminum, carbon steel, and engineered plastics — laser cutting, forming, and multi-axis machining held to repeatable tolerances, from a single prototype part through production quantities.
UL 508A Certified Shop • U.S. Veteran-Owned • Las Vegas, NV
Processes
Laser cutting
Clean, dross-free profiles in stainless, aluminum, and carbon steel with tight, repeatable part-to-part geometry.
Precision machining
Multi-axis milling and turning of housings, plates, brackets, manifolds, and fixtures to print.
Forming & bending
Press-brake forming with consistent bend radii, tight flange tolerances, and repeatable setups.
Welding & fabrication
TIG and MIG welding, ground and finished, including sanitary and washdown-grade seams.
Hardware & finishing
Inserted hardware, tapping, deburring, passivation, powder coat, anodize, and brushed finishes.
Prototype to production
One-off first articles and volume runs from the same documented process and fixturing.
Machining & cutting specifications
Send your model and we will confirm every line against your print before quoting.
Request a Quote| Materials | 304/316 stainless, 5052/6061 aluminum, carbon steel, engineered plastics |
|---|---|
| Typical tolerance | ±0.005" on machined features; per drawing where tighter callouts apply |
| Sheet range | 22 ga through 1/2" plate |
| Processes | Laser cutting, press-brake forming, multi-axis machining, TIG/MIG welding |
| Finishing | Deburr, bead blast, #4 brushed, passivation, powder coat, anodize, wet paint |
| Inspection | In-process dimensional inspection with first-article verification |
| Volumes | Prototype and first article through ongoing production runs |
| File formats | STEP, STP, IGS, SLDPRT, DWG, DXF, PDF |
Off our floor
What tolerances do you hold?
We typically hold ±0.005" on machined features and work to tighter callouts where your print requires them. Send the model and we will confirm what is achievable — and flag anything that would drive cost before you commit.
Can you cut and machine both stainless and aluminum?
Yes. We routinely run 304 and 316 stainless, 5052 and 6061 aluminum, carbon steel, and engineered plastics, and we control for cross-contamination on stainless work.
Do you take one-off prototype parts?
Yes. Single parts and first articles are normal work for us, and the same fixturing and documented process carries forward into production when you are ready to scale.
What files do you need to quote?
A 3D model (STEP, IGS, SLDPRT) plus a 2D drawing with tolerances, material, and finish callouts gives us everything needed to quote accurately. DXF alone is fine for flat laser parts.
Send us your drawings
Upload STEP, DWG, or DXF files with your material and rating specs. Free consultation, response within one business day.
UL 508A Certified Shop • U.S. Veteran-Owned • Las Vegas, NV